What size and DPI do you need for a map poster?
Aim for about 300 DPI at the size you print. Mapidian targets 300 DPI for print-ready files and shows the real figure live. Up to A4 that is reached on any device; larger posters can export at a lower DPI because browsers limit canvas size, and anything under 200 DPI is flagged as likely to look soft.
What does DPI mean for a poster?
DPI (dots per inch) is how many image pixels are printed per inch of paper. The pixels a poster needs equal its size in inches multiplied by the DPI you want.
For example, A4 is 21 × 29.7 cm, or about 8.27 × 11.69 inches. At 300 DPI that is 2480 × 3508 pixels, which is exactly what Mapidian exports for A4.
What resolution does the editor export?
The export aims for 300 DPI at the poster size you choose. The editor shows the DPI it will actually reach next to the poster, and the tooltip gives the export size in pixels. If the figure is below 200 DPI the editor marks it as low, because the print starts to look soft at normal viewing distance.
The minimum export side is 600 pixels, so very small custom sizes are never rendered smaller than that.
These figures are for print-ready exports. The low-resolution PNG is limited to 1500 pixels on its longest side, which on an A4 poster is about 128 DPI; the readout and its tooltip show the size you will actually get.
Which DPI do the common sizes reach?
The table shows PNG and PDF exports on a typical desktop browser and on a phone or tablet. Your own device can differ, so trust the live readout in the editor.
| Poster size | Desktop browser | Phone or tablet |
|---|---|---|
| A4 (21 × 29.7 cm) | 2480 × 3508 px, 300 DPI | 2480 × 3508 px, 300 DPI |
| A3 (29.7 × 42 cm) | 3508 × 4961 px, 300 DPI | 2896 × 4096 px, 248 DPI |
| A2 (42 × 59.4 cm) | 4961 × 7016 px, 300 DPI | 2896 × 4096 px, 175 DPI |
| 30 × 40 cm | 3543 × 4724 px, 300 DPI | 3072 × 4096 px, 260 DPI |
| 50 × 70 cm | 5071 × 7099 px, 258 DPI | 2926 × 4096 px, 149 DPI |
| 61 × 91 cm (24 × 36 in) | 4902 × 7344 px, 204 DPI | 2734 × 4096 px, 114 DPI |
| 70 × 100 cm | 5020 × 7171 px, 182 DPI | 2867 × 4096 px, 104 DPI |
Why do large posters export at a lower DPI?
A browser has to draw the whole poster as one image in memory, and every device has a ceiling. On desktop browsers Mapidian allows up to 8192 pixels on the longest side and 36 million pixels in total. Phones and tablets are held to 4096 pixels and 16 million pixels, and the same 4096 and 16 million caps apply to SVG exports on every device.
When a poster would exceed the ceiling, it is scaled down proportionally, so the DPI drops while the proportions stay the same.
How do you get a sharper large print?
- Export from a desktop browser: it allows the highest resolution.
- Check the DPI readout before exporting and choose the largest size that stays above 200 DPI if sharpness matters most.
- Large posters are normally viewed from further away than small ones, so a lower DPI is often acceptable on the biggest formats.
Frequently asked questions
- Which size should I pick for a standard frame?
- The print presets include popular frame sizes such as 30 × 40 cm and 50 × 70 cm, the ISO sizes A5 to A2, US Letter and 61 × 91 cm (24 × 36 in). You can also enter a custom size.
- Does the PNG file remember its DPI?
- Yes. The PNG stores the real resolution of the export, including when the poster was scaled down to fit the device, so print software reads the correct physical size.
- Why is the DPI different on my phone and my computer?
- Phones and tablets limit the export canvas to 4096 pixels on the longest side, while desktop browsers allow up to 8192. The same poster therefore reaches a lower DPI on a phone or tablet.
- Can I enlarge an exported file later?
- Enlarging a PNG or PDF does not add detail. If you need more pixels, export again at the larger poster size, ideally from a desktop browser.
Open the Mapidian poster editor
Related guides
- How to make a map poster of your city
- PNG, PDF or SVG: which file should you use to print a map poster?